Glare protection solar system sun visor photovoltaic system reflection protection fence panel

Strong reflections from solar modules can dazzle neighbours and motorists. To avoid potential photovoltaic glare and legal disputes, we offer an optimal glare protection material. This is a ribbon fabric that can be made to the desired size and is quick and easy to install thanks to its reinforced hem with eyelets.

The relevant regulations in Germany and Austria provide the basis for assessing what is often perceived as a disturbance. Both guidelines stipulate that the maximum acceptable duration of glare is 30 minutes per day and 30 hours per year. For existing installations, one solution is to erect an opaque fence.

Don't take any risks. Avoid disputes involving injunctions, removal orders and claims for damages. Take corrective action.

Note: To cover individual modules, e.g. on the roof, please use our additional heat-resistant jute tarpaulins (available in 2 qualities) or our tarpaulin with silicone coating.

Material: PE | polyethylene
Characteristics: hard-wearing, robust, tear-resistant, permeable to air, water-repellent
Shading value: about 75%
UV radiation: stable up to 300 kLy
Fabric Type: Ribbon fabric
Basis weight: 200 g / m²
Material thickness: 900 μm
Color: green
Rubber cord: standard without
Hem: yes | The padded hem reduces tearing of the eyelets.
Hem sides: circumferential
Hem width: on average approx. 70 mm
Eyelets: yes
Eyelet type: round eyelets
Ø eyelets: 16 mm
Eyelet spacing: approx. Every 400 mm
Tensile strength: 1305 | 415 N / 5 cm
Temperature resistance: -40 ° C to +80 ° C
Production: Germany