Air permeable tarpaulin with 2 sewed in and reinforced edges in 250g /m² for containers and skips
Air permeable tarpaulin with 2 sewed in and reinforced edges in 250g/m² for containers and skips
This is a variant of the stable air-permeable fabric tarpaulin, here equipped with a three-dimensional shape, to give it at the front of the roll-off container stop and fixation. The main advantage of a monofilament tarpaulin is that only one person can handle the large transport containers and no helper is needed. Even with containers, which often have to be loaded and unloaded, this form of monofilament is very well suited, since the air-permeable PE tarpaulin can not slip from its position when tilting the loading area or the skip.
This is the TYP 3 tarpaulin. To order, please specify for the width of the dimension E (results from B + 2x C), and for the length of the dimension A + C. (see for explaining our order form in the download area).
In addition to the usual standards, we offer special sizes for roll-off containers, in 2 variants, with or without expander rope. The tarpaulin with reinforced corners is available in five different colors. The standard sizes with 250cm width are suitable for all roll-off containers.
Material: PE | polyethylene
Characteristics: lid-shaped, dimensionally stable, high-strength, stiff, stable, abrasion-resistant, permeable to air
UV radiation: stable
Equipment: 2 sewn-in and reinforced corners
Fabric Type: Monofilament fabric
Basis weight: 250 g / m²
Material thickness: Info follows
Color: Green, Blue, Red, Black, Gray
Rubber rope: as desired
Rubber rope thickness Ø: 8 mm (up to 7 m tarpaulin length) | 10 mm (from 7 m tarpaulin length)
Hem: Yes | The padded hem reduces tearing of the eyelets.
Hem sides: circumferential
Hem width: on average approx. 70 mm
Ösentyp: round eyelets
Ø eyelets: 16 mm
Eyelet spacing: approx. Every 400 mm
Certification: DEKRA, based on VDI 2700 sheet 3.3